Ghost Immobiliser Fitting
Guard your car from key theft, cloning and hacking with the world's first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be connected to the immobiliser to send you notifications when your vehicle is stolen or tampered with.
Installing an Ghost immobiliser is fairly simple for the qualified technician. Making use of the correct tools, insulation tape, and heat shrink tubing is crucial.
Getting Started
Unlike physical theft protection devices like wheel locks and car alarms, ghost immobilisers protect your vehicle without the need for LED indications or key fobs. Instead they connect directly to the ECU's CAN network and can only be activated after entering a PIN sequence. This provides a more secure level of security against key hacking, cloning, and even ECU swapping.
Therefore, the installation of a ghost immobiliser Birmingham has to be done with great speed and accuracy. It's like navigating the minefield. A single mistake could cause irreparable damage to the circuits of the electrical system of your vehicle. To avoid this, it's crucial that you know the procedure for installing and prepare your vehicle accordingly.
It is necessary to remove interior panels from the vehicle to make room for your immobiliser. Once you've found the ideal place to conceal it put it in place using cable ties to prevent it from being removed or tampered with. Then, clean up the wiring by tying down loose wires and utilizing insulation tape or heat shrink tubing to cover the exposed connections. This will help to minimize the risk of short circuits that are not intended to be there while also improving the aesthetics and decreasing the chance of tampering from thieves.
Finally, identify the source of constant 12V power and a grounding point for the ghost immobiliser. Once you've located them, test the power cables with a multimeter. Then, connect the CAN H and L wires from the immobiliser to your chosen power source and the grounding point.
It's important that you double-check all the connections and inspect the immobiliser to look for signs of corrosion. You should also test the system to ensure it's functioning properly by entering a PIN number and then starting the engine. This should become a part of your routine, as it will allow you to spot any issues that are intermittent early. Regular testing will also help to prolong the life of the device and ensure that it is operating at peak performance.
Preparing the Vehicle
Installing a Ghost immobiliser is a process that requires skills and knowledge. A wiring diagram of the vehicle is essential for locating the correct wires and establishing precise connections. A multimeter can be used to verify the electrical properties and ensure safety. Cable ties and insulation tape can be used to protect connections from being tampered with and keep them secured. Additionally, what is a ghost immobiliser will provide specific guidance specifically tailored to your Ghost Immobiliser model.
Once installed the ghost immobiliser will prevent unauthorised engine start by requiring that the owner input a unique PIN code sequence using buttons on the steering wheel or centre console. The code can be changed at any time by the owner by hand or remotely using a mobile app. The device also operates silently and is inaccessible to thieves because it doesn't emit radio frequency.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals sent by ECUs and then blocks the engine if a false signal is detected. The system is tamper-proof and weatherproof, and does not include key fobs or LED indicators to draw the attention of thieves.
It can be placed behind the dashboard or in a hidden area, so it isn't seen by thieves and does not hinder the vehicle's performance. It could even be placed inside a small, compact box which makes it less likely to be discovered during an inspection by unscrupulous salespeople selling cars.
Its stealthy operation, along with its integration into the CAN-bus system of the vehicle, is an effective deterrent to modern vehicle theft techniques, such as signal relay attacks and key copying. The system can be integrated with other security measures to create a powerful barrier that can deter even the most persistent thieves. This is why more and more insurance companies are recommending or even requiring ghost immobilisers to be installed, since they can drastically reduce the cost of insurance.
Making the Connections
Unlike traditional security systems that can be heard by thieves, ghost immobilisers are silent and prevent them from knowing when your vehicle has been turned on. They also block high-tech methods used to steal vehicles for instance, OBD port hacking. Installing them without leaving permanent marks on your car is an ideal option for those who plan to sell the vehicle in the near-future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to protect your car from theft. It uses the CAN data network to disable your engine and generates a PIN code that only you know, meaning it's difficult for criminals to identify. It can be used in various automobiles, and it can work with all the features that are already in place, such as car alarms, steering wheel locks, GPS trackers, and door lock bypass.
If you decide to opt for an Ghost immobiliser, be sure to refer to the wiring diagram for your particular vehicle model to identify the wires that need connecting. Verify their positions to ensure they're correct, and then label them or tape them to help you remember them. It is also necessary to find a source of constant power (12V) and a grounding point for the system. Once you have these in place, you can start to make the connections needed to complete the installation.
The ghost immobiliser won't allow your vehicle to start unless you enter a pin code via the buttons on the steering wheel or dashboard. This will stop ECU cloning and other methods of stealing vehicles. It can also be used with other Thatcham approved security devices such as alarms or tyre clips to provide your vehicle with an even higher level of protection.
As the UK automotive industry grows, as do the options available to secure your vehicle. With so many avenues for thieves to gain access and steal your vehicle it's essential to do all you can to ensure it isn't taken away. This is why ghost immobilisers are such a popular choice among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via the CAN network. This stops the engine from being started until the PIN code has been entered. This makes it extremely difficult for thieves to copy your key fob to start your vehicle, and difficult to disable the system by hacking its electronics.
Ghost Immobilisers can also be used together with GPS tracking devices that can assist you in tracking your vehicle and locate it if it's stolen. This isn't a common option for security products sold by the aftermarket however it's an excellent option to increase your security and get peace of mind knowing your vehicle is always secure.
The Ghost-II immobiliser not only provides enhanced security but also a convenient experience for the user by eliminating the need to use additional key fobs or devices. It features a simple, user-friendly PIN code entry that can be integrated seamlessly with your daily routine. It also offers deactivation modes and convenience features that let you temporarily disable the immobiliser for valet parking and servicing.
Before beginning the installation process, you should familiarise yourself with your vehicle's wiring and prepare the tools. A basic set of tools will allow you to create precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat-shrink tubing is essential to shield connections from short circuits. Cable ties can also be used to secure wiring. It's also important to work in an area which is well-lit and wear safety equipment when working with electrical tools and components.
After you've completed the installation, you must test the Ghost immobiliser to ensure that it's working as intended. First, you need to try to start the vehicle without entering the PIN code. If this fails, you'll have to retest the system and perform a more thorough examination of the connections.
The Ghost Immobiliser, unlike other security systems, is a hidden device that is not able to be identified by thieves. It is also far more effective than physical deterrents like wheel clamps and steering locks. It is TASSA recognized and approved by some insurance companies, which makes it an investment that's cost-effective and will give you peace of mind you want.