The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against car theft. They stop the vehicle from starting if it doesn't have a key fob. They also help to stop hotwiring and other traditional methods of vehicle theft. However, more modern methods such as key cloning and relay theft are becoming more common.
Created to counter these current trends The ghost immobiliser is designed to make your car completely unnoticeable. ghost car immobiliser is quiet and discreet and does not rely on radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device, connects to the CAN data network of your vehicle in order to prevent key cloning or theft. It is a TASSA-approved device and insurance companies also endorse it. It is silent and virtually undetectable to thieves. It uses buttons on your steering wheel, the centre console, and doors to create an unique pin code that must be entered before you are able to start your car. You can create up to 20 different sequences to provide greater security. The system is simple to install and doesn't require any additional hardware or wiring.
It is recommended to use an accredited installer of CAN immobilisers that is skilled in the specific type of vehicle you have to ensure the most effective results. Ideally, they'll have a workshop in your area where you can visit to get your installation done. There is also various tools and equipment that can assist you in the installation. These include hand tools, a multimeter, and insulation tape and heat shrink tubing to safeguard connections. A user's manual will provide you with instructions for your vehicle's wiring.
Before starting the installation remove the battery from the circuit to prevent short circuits and airbag deployment. It is crucial to confirm the exact location of the CAN H and CAN L wires, since incorrect identification could lead to unintentional system integration. It is recommended to mark the wires with small pieces of tape or label them with labels. Utilize a multimeter to verify that the power source is providing the same 12V.
Advanced thieves may employ various strategies to get around Ghost Immobilisers, such as blocking or spoofing. These techniques work by amplifying the signal transmitted from your key fob to the vehicle's electronic control unit. However, with the latest anti-jamming technology and vigilant monitoring you can safeguard your vehicle from these sophisticated attacks.
Security Enhanced
Ghost immobilisers offer an additional layer of security to guard your car from theft. It works with a PIN code protection system that is entered using existing buttons on your dashboard or steering wheel which makes it difficult for thieves to gain access the device and take your vehicle. The device is designed to be hidden inside your vehicle. It doesn't have any lights, or other signals to alert a potential burglar to its presence. It is directly connected to the ECU of your car through the data bus. This means that it is not susceptible to relay attacks or hacking.
It's a fantastic investment for those with high-end vehicles, which are at higher chance of being stolen due to their price and the popularity of their vehicles. Its security features are enhanced to protect against key copying, ECU swapping, and other threats to your car's security. Some ghost immobilisers are also integrated with apps, meaning you can arm or disarm quickly. They also come with an option for service/valet that permits you to temporarily disable them while your vehicle is being repaired or serviced.
Another benefit of ghost immobilisers is that it does not require cutting of wire. This is a good feature, especially if own a brand newer vehicle that doesn't have immobiliser technology built-in to it. Certain systems also work with GPS tracking devices, adding an extra layer of security to your vehicle. The use of a GPS tracker can also help you reduce your insurance premiums. If you decide to purchase an immobiliser that is ghost, make sure it's TASSA-certified and an expert installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser has been made to work with all major car models and makes, protecting your precious possessions from theft. It generates a unique pin number by pressing buttons on your steering wheel, console or door panels. You must enter the code before you can drive. It is tamperproof, undetectable and backed by a three-year warranty. It is also fully approved by insurance companies. This means that you can reduce your cost of insurance.
The Ghost system differs from the normal immobilisers, which use the key fob to provide ignition control. It is directly connected to the engine controller via the CAN bus. It is nearly impossible to remove, disable or hack. The Ghost system can also be integrated with an iPhone app to monitor remotely and management.
You can create an PIN that is easy to remember, but mathematically impossible to guess for thieves. The PIN can be personalized and changed at any point, so you can ensure your vehicle is safe even when you park it on the street or in a public parking lot. You can also choose a valet or service mode if you need someone other than you to drive your car for a brief period for instance, when you're in the garage for servicing. This feature will also help prevent your vehicle from being stolen by a shady mechanic. You can select the Ghost Call alert to give you additional security. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser is an effective security device that protects your vehicle against common theft methods such as key cloning and relay attacks. It works by connecting to the car's CAN data network and blocking communication with the engine ECU. This system makes it difficult for thieves to hack or replicate your vehicle.
After installation, you'll need to enter a PIN of up to 20 digits using the buttons on the dashboard and steering wheel to begin the car. The system is completely hidden and undetectable to thieves, because it does not emit any radio frequency signals. It can also be programmed to an individual-changeable PIN code which further adds to its security. The system is also designed to avoid cutting the circuit, making it virtually impossible to hack into.
Certain systems let you connect directly to the immobiliser using an app on your smartphone and disable it instantly if you forget your PIN. Some even have an option for service or valet that allows you to start your vehicle temporarily, such as when you need to drop it off for servicing or valet parking.
The Ghost Immobiliser is also undetectable by thieves, as it does not transmit radio signals. This is a major advantage over other aftermarket security systems. Additionally, it is simple to use and does not require any wiring that is complicated. It can be used conjunction with dash cams for additional security. Dash cams include the Thinkware F70, which features clear & sharp 1080p HD dashcam footage as well as Format Free Technology and parking mode. The system can be hardwired to ensure maximum performance and durability.
Installation
It is essential to select the best immobiliser ghost to shield your vehicle from thieves. This device will help to prevent car theft by blocking the communication between the engine controller unit (ECU) and key fobs. This prevents thieves from intercepting the signal and then cloning the key fob to begin your car. It also can detect any signs of manipulation and alert the vehicle owner.
The device is simple to install and integrates with your vehicle's existing systems. It does not require any modification to the vehicle's wiring and can be tucked away in a hidden place, like under the dashboard. Follow the instructions in the manual to make sure the device is installed correctly. It is also crucial to test the system after installing it. This will ensure that the immobiliser ghost is working exactly as it was intended to.
You can buy an Autowatch Ghost 2 immobiliser and then have it installed by a certified installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to remove the system or bypass it. The installation process typically takes between 2 and 3 hours.
It is recommended to review the wiring diagram for your vehicle prior to the installation process. This will help you locate the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. Check all connections to make sure they are safe and well-insulated.
Once the installation is completed, you are able to start using the Ghost Immobiliser in a normal manner. It will turn off your vehicle's ignition if it is not started with the correct PIN code which you can set yourself. The ghost cost of immobilisers can also be put into service/valet mode when you need to hand over your vehicle for servicing or valet parking.